Litter Bag Carrier

Use PETG, ABS/ASA, or PC Blend.  Standard PLA is too brittle.  The inner and outer pieces print together.  The tabs on the ends are to aid with bed adhesion.

To use, put the inner piece inside the bag and fold the bag edge over it.  Slide one end of the inner piece into the outer pinching the bag between them.  Bend both pieces to straighten them and the other end will slide in easily.  When released to its natural bend, the two pieces clamp the bag securely.  The more weight in the bag the tighter the bag is held.

There are three versions to choose from depending on your print bed size.