Meduse. Large lampshade in 44 minutes.

I have seen several models that used the principle of a spiral (and even made similar ones myself), but they are not strong and stable enough. Therefore, I decided to use not 1 spiral and connection, but 8 spirals and 8 mounts.

Lamp diameter – 200 mm.

Suitable for IKEA HEMMA lamp and most other pendants with a socket of about 40 mm and an E27 base. It is not worth using incandescent lamps, install "cold" ones, for example LED ones.

Printing time is about 44 minutes with a layer of 0.3, a nozzle of 0.4. No support required.
For printing, you can use any plastic close in rigidity to PETG, PLA is more rigid, so the lampshade will not be long enough.