Moka Espresso Pot Handle

Fixed my moka espresso pot using M3 screws. Please check the model carefully before printing, because I am not sure what brand mine is. I think it makes 6 cups.

My espresso pot uses two screws to hold it in place. One M3x35 screw & nut holds it and the lid in place. There is a space to insert an M3 nut in the handle. This screw goes perpendicularly through the pot and stops the handle from moving up and down. This hole was already in my pot. Do not drill yours. Use a different handle if it is not present.

Print as oriented using supports from buildplate only. Use a heat-resistant material such as polycarbonate. Many plastics are extremely flammable.

WARNING: Not tested yet. Standing by with fire extinguisher.