April 20, 2024
Description
Print with 0.2 mm layer. 15% infill will be fine. It's made to be fast and easy (but effective) print!
Change colours at 7.2 mm (from white to pink) and at 7.6 mm (from pink to black). Or use the provided .3mf file :)
Use whatever colours you like :)
Scale only X and Y axis. For larger scales the screw hole could be too large. I can prepare STL file for a larger scales, just let me know!
Frame: Print with 0.2 mm layer and in case of scaling use the same % as the main picture (X and Y axis.). You should be able to press the picture into the frame easily. It‘s designed to be strong enough for hanging on the wall.
Enjoy!
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Petra Ollender
