Single Straight T-Track Module (HO)

HO scale T-Track single straight module 490mm x 490mm (19 9/32" x 19 9/32"). 

Can be printed in PLA or PETG. The module is designed for 0.5" of foam/plywood or 0.25" foam and plywood. The legs are adjustable from 2.75" - 4". 3MF files contain the print settings for PETG and some reinforcement around the screw holes. 

Print list:

• 8x Legs
• 1x Cross junction
• 2x Corners
• 2x Mirrored corner
• 2x Junction inside
• 2x Junction outside

Additional hardware:

• 8x Hex head screw ¼"-20 2" (or equivalent)
• 8x Nut ¼"-20
• 20x m2-7mm thread 8mm length
• Glue

Build notes:

• Total print material is ~300g
• See colored image for placement of sections
• Make sure all the sections have the holes for the legs (hex head screws) in the same direction
• The hex head screws need to be glued or epoxied in
• When screwing the printed legs on, be careful not to over tighten the legs