Funnel for Mazda 3 Skyactiv engine oil change

This is what you've been looking for on all the 3D parts forums. You just want a better funnel when changing the oil in your Skyactiv engine on your Mazda 3 because standard funnels don't stand still.

For some reason, Mazda thought it was a good idea to have the oil filler tube not vertical. And then they just added that useless engine cover to create extra issues and make oil filling even more miserable.

Fear not, I've got you covered with this specially designed funnel that fits just right into the oil filler tube and stays there. It does not touch the engine cover and stays put because it is inserted into the oil filler tube just far enough, not too far so that it blocks the flow of fresh oil going into your magnificent Skyactiv engine. And yes, the geometry takes into account that there are two little pieces of sh..., I mean plastic that are used to lock the oil cap in place.

So go ahead and indulge yourself, print this beautiful, awesome, well engineered piece of technology and save yourself 23 seconds of work the next time you do an oil change on a Skyactive engine. And the time after that, and for as long as you own that car. It's the gift that keeps on giving!

AFAIK this funnel should work on all 2.0-liter Mazda Skyactiv engines. For reference, mine is a 2017 model year. If your oil cap is the type that "clicks" on in a single turn (no threads), this funnel should fit.

Edit: Yes, the top flange is pretty thick. That's because the parts tends to break there when you try to remove it from the bed.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Yes

Supports:

Resolution:

0.3 mm

Infill:

Filament: Sunlu PLA Blue

Notes:

Category: Tools