April 19, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 0.6
PLA Overture Space Gray Transmission Distance: 2.1
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cement Gray
At layer #12 (1.04mm) swap to Space Gray
At layer #18 (1.52mm) swap to Jade White for the rest.
Do not Uniform scale model do not increase thickness as it will change the image print, you can only change the length and width.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
bradcorey
