April 19, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 155.24x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Extrudr NX2 Signal Green Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to Signal Green
At layer #21 (1.76mm) swap to Jade White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Alex S.
