GPS and antenna mount for FPV drone (optional XT60e)

Backpack module for 5" FPV quadcopters. 

Please do verify the dimensions of your quadcopter:

• backpack is 20mm high. Check that your frame has at least this height.

• mounting points are separated by 24mm (measured center-to-center)

• mounting points are 4mm wide and hexagonal (will also fit round standoffs)

If you need other dimensions, let me know and I'll see what I can do :-)

This backpack has place for:

1. an SMA connector (for your VTX antenna).

2. a T-antenna (e.g. ELRS or Crossfire).

3. a 15x15x5,2mm GPS module (e.g. M100 mini)

4. The GPS and video SMA connector are slanted 25° backward. 

5. Optional space for an XT60E-male connector (depending on backpack version)

The stuff I mounted on my quad with the backpack (for inspiration):

• Apex 5" frame

• The MMCX to SMA cable that comes with the Speedybee TX800 VTX

• HGLRC m100 mini GPS

• Radiomaster RP1 T-antenna (ELRS)

• XT60E-male connector 

• Two m2.5 bolts to attach the XT60E-male

Should be printed in TPU (I used Fiberology Fiberflex 40D).
Regarding the use of support material: 

• the standard version does not need supports

• The version with XT60E (which I think is much cooler) unfortunately needs support

Mounting all the hardware (especially the GPS which really should be inserted first) will require a bit of a fight with the TPU and the cables. Let me know who won :-)

If you liked this model, please drop a like and/or a comment.