7"/10" HDMI LCD Angle Adjustable Case

A case for 7" / 10" LCD panel with HDMI input.

• Angle is adjustable (thanks to the articulating arm thing)

• Both of horizontal / vertical mount is supported. Supported LCD Panel / Driver Board

• 7" panel Chimei Inolux N70ICG-L21

• 10" panel AUO B101EVB01.0 These LCD panels can support up to 1920 x 1080 input thanks to scaling performed by the driver board. Native resolution is 1280 x 800, but 1920 x 1080 scaling is so good quality that Windows UI is fairly readable especially with 10" one. Color accuracy and viewing angles are pretty good too (considering this price range). Brightness is set to 50 by default, so I would change it to 100.

  Required hardware

• 4x M3 6mm screws For 7" panel, please print following models.

• lcdpanel3v4 bottom v12.stl

• lcdpanel3v4 top v8.stl For 10" panel, please print following models.

• lcdpanel5 bottom v20.stl

• lcdpanel5 top v6.stl For both 7"/10" panels, please print following models for common parts.

• lcdstudio5c v14.stl

• lcdhid3 studio v11.stl
• lcdpcb lid2 v7.stl
• lcdpcb arm1 v21.stl
• lcdarm40 v35.stl
• knob.stl

• ShortArm-_Threaded_rot90.stl Knobs and arms are identical to the source except the arm is rotated for easier printing. The source has longer arms as well.

  For printing arms and knobs with PLA, default profile may be too weak and easy to break. A stronger profile like 4 vertical perimeters would be recommended. Other parts are just fine with the default profile.

  Please feel free to remix by using IGES files posted together.

  Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament:
Hatchbox / Amazon / 3D Solutech PLA Red

Notes:

Category: Computer