Glasses / Sunglasses Holder

My wife wanted some glasses holders made for her, that she could stick on the cupboard wall in our bedroom, so that she wouldn't keep losing them.

This is what I have designed and made here.

I used 2 strips of double sided foam tape (available from any stationers ie The Works, Ryman, Staples, etc.) that I stuck on the back of the holder to stick it to the wall. Foam tape is better than just double sided tape as it sticks better and has a better thickness to it.

There are 2 types of holder. Glasses Holder 1 has a flat front surface, while Glasses Holder 2 has a more rounded front edge to it. Both are the same except for this slight design difference.

I printed these on a raft without supports. I did try supports, but couldnt get them off very well. Printing on a raft helps with the print not lifting off of the bed while printing. Please try it your own way that gives the best results for yourself.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you. 

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.7.0 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees (First layer @ 75 Degrees)

Infill: 10%

Supports: No

Skirt: No

Brim: No

Raft: Yes

Enjoy your prints.

                           https://www.buymeacoffee.com/tigertone