Goldwing GL1800 or GL1500 Cup holder

You will need to scale in Cura using 2540. This will give you the proper size. I couldn't find a decent cup holder for my wing so I designed this one. Fits 20 oz. Yeti and Ozark Trails 20 oz sold at Walmart also any plastic water bottle or pop can. I used NinjaTek TPU for basket and wire zip ties to fasten to the ring. Fits on clutch side mount. Use 1/4-20 bolts to fasten brackets together. There is enough adjustment in both axes to level cup .Of course use longer 6mm bolts to fasten to bike. No supports needed. 25 percent infill for strength and 2mm walls. I used Proto Pasta for brackets and ring to withstand midday heat in the summer. Heat treat in oven at 230 degrees Fahrenheit for one hour. No supports needed use 25% infill or higher for strength. Use 2mm or higher wall thickness. It will also fit on the GL1800, 2000 ~ 2017 the spacing is the same.

Category: 3D Printing