Ambient light sensor case for Seeed XIAO RP2040 and BH1750

A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in case you'd like to use a different MC. The top of the case is covered with a piece of frosted transparent film. The film diffuses incoming light, making the sensor response less directional. It also protects the sensor from dust.

Print settings

• Layer height 0.2 mm
• Line width 0.42 mm
• 3 wall lines
• 4-5 top & bottom layers
• Infill ≥15%
• Supports enabled, tree supports recommended

Approximate print time @ 60 mm/s: 2:30 h