TINY MAGNETIC DOOR STOP (SLIMLINE)

This is a very small and discrete magnetic door stop which holds the door very close to the wall and when the door is close does not intrude into the room or floor.

Print two. (PLA using standard PrusaSlicer 0.2mm QUALITY setting, 0.4mm nozzle)

You will require three 8mm x 6mm magnets for each part.  Insert the magnets into the recesses taking care to ensure that the polarity matches. (NOTE the holes in the face are to allow the magnets to be easily removed should you make a mistake or simply want to use them elsewhere.)

Screw one part complete with magnets in the desired position and “click” the other on to it to correctly locate the magnets.

Use hotmelt glue or double sided tape to bring the door to the open position and to “glue” the second part into place.

When the glue is set, gently separate the magnetic pieces and screw the second piece to fix it in position permanently.