Spiral Night Lamp

Spiral night Lamp

Print Settings :

0.4 mm nozzle, 0.3 mm layer height, 2 perimeters, 0% infill, 0 Top layers, 2 Bottom layers, brim 5 mm

If model is too tall for your printer, jus scale it in Z axis for example to 90%

For BambuLab X1 there is 3mf file

Components

This lamp is designated for small led light like on picture below, MR 16 lamp socket, and Led Light 12 V

like on this link

https://www.amazon.com/Bioluz-LED-Halogen-Ceramic-Connector/dp/B0743SYWGG?th=1

You have to put this socket with led lamp to inside of the Spiral Lamp using Led Holder

and connect this lamp with switch and adapter 12V. I used component on photos below