November 6, 2021
Description
I modified the two piece rocket into one item. I resized it in the slicer to 20% (which ends up about 239 mm) tall. The base I made with Fusion 360 as a simple platform with an open area in the middle to put the electronics for lighting.
Printer Brand:
Lulzbot
Printer:
Mini 2
Yes
Supports:
Yes
0.2
Infill:
20%
Notes:
White rocket, translucent smoke and teal/green base. Lit by leds via an arduino.
License:
Creative Commons — Attribution
Iguanaman
