April 21, 2024
Description
Wall mounted cell phone holder. I personally did this for my Samsung S8+ which has a case as well, so this specifically fit that pretty well. Though the result is something that can work/hold multiple types of phones securely, some with cases depending on thickness/width of the device.
The opening at the bottom is to feed a charger cable to which is centered for the S8+.
Could also be mounted on the wall with simply an adhesive of some sort instead of screws.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: Tianse PLA Black
Notes:
I usually feed the power cable through one of the side slots so it can hang from the mount as well since it feeds up from the outlet by the floor.
Secured in this case with 2 small screws though regular adhesives could be used to avoid any holes in the wall if thats a concern.
This original design was for an S8+ with a case, though smaller phones like the S5 above fit fine, just have extra wiggle room.
How I Designed This ===================Hardware/Software Used
Modeling: Fusion 360
Printer: Creality Ender 3
PLA: Tianse Black PLA
Slicing: Simplify3D
License:
Creative Commons — Attribution — Noncommercial
3dcdesign
