Cover for AAEB W-test stand dule channel

A cover for our Case for Adafruit Animated Eyes Bonnet for Raspberry Pi. This cover will work with any of the three versions of the case:

Case W/ HC-SR04 https://www.thingiverse.com/thing:3177147 or https://www.prusaprinters.org/prints/8493-case-for-adafruit-animated-eyes-bonnet-for-raspber
Case W/ US-100 https://www.thingiverse.com/thing:3287084 or https://www.prusaprinters.org/prints/8502-case-for-adafruit-animated-eyes-bonnet-for-raspber
Case W/ HC-501 https://www.thingiverse.com/thing:3574356 or https://www.prusaprinters.org/prints/8493-case-for-adafruit-animated-eyes-bonnet-for-raspber

There is an 8020 Series 10 compatible track on the top cover for mounting additional components to the project. Additionally, this track is placed on the center line of the case and has holes for mounting to an 8020 series 10 extrusion. This can be used to mount the case to a framework of 8020 to give "eyes" to your project.

It is one of a series of covers for the case for Adafruit Animated Eyes Bonnet for Raspberry Pi bonnet. The others can be found at:

Blank cover https://www.thingiverse.com/thing:3552052

Single track https://www.thingiverse.com/thing:3552054 or https://www.prusaprinters.org/prints/8529-cover-for-aaeb-w-test-stand-single-channel

Duel track https://www.thingiverse.com/thing:3552060 or https://www.prusaprinters.org/prints/8528-cover-for-aaeb-w-test-stand-dule-channel

Single track center line https://www.thingiverse.com/thing:3578016 or https://www.prusaprinters.org/prints/8530-cover-or-base-for-aaeb-using-a-single-channel-on-c

Speaker Cover https://www.thingiverse.com/thing:3612211 or https://www.prusaprinters.org/prints/8550-aaeb-base-for-top-mount-speaker

Print instructions

Category: Electronics