We're All Devils in Our Own Hells

Update - 4/27/24
I added a 3 color manual swap (2 filament changes) and a 4 color manual swap (3 filament changes) option. I haven't tested these out. Please let me know if you have any issues with them when printing.


As difficult as it is to realize, we are the cause of a lot of our own problems. Our choices guide our paths and impact our lives in profound ways. This model was designed to be a reminder for myself to remember that a lot of the hardest things I had to deal with in my life were self-caused and to be more careful and calculating when I am able, to potentially avoid negative consequences.

I uploaded a couple of files to make this as easy to print for those want to. There is an "Auto Color Swap (AMS/MMU)" version for use with multi-color printers, allowing it to be printed face-down and flat on the print bed. There is also a "Raised (Manual Color Swap)" version that allows you to add a manual color swap at layer 8. Both files are designed to be printed at .20mm layer height (all layers), 1 wall, with 'Detect Thin Walls' on. You should be able to size up without any issues; if you sized down, you could run into issues with the text and/or small details showing up properly. If you increase the Z Height, make sure to adjust the color changes when setting up the file to print.

I would love to see any makes you do. If you make this model, please upload your picture(s)! :)