VESA 75 to 100 adapter

Quick and dirty model to make a VESA 75 monitor fit in a VESA 100 arm. Includes space to insert M4 nuts. 

Additional hardware required:

• x4 M4 Nuts
• x4 M4 Bolts (10 to 14 mm in length)
• x4 M4 Bolts (Ideally the ones that come with your monitor arm, if not anything longer than 20mm should work)

Pause the print at approximately 6.8mm (may vary depending on your layer height) and insert the M4 nuts. They fit snugly, so make sure they are all the way down unless you want crash errors. 

The orientation I'm uploading the model should be fine, though because of the forces applied it should ideally be rotated 90° on the X or Y axis. I'm providing the STP file so that it's easier to fit any need I haven't contemplated. Scale it, make it thinner, flatten one side, whatever.