April 25, 2024
Description
The tire profile gauge has two scales on the upper side. One is for summer (sun symbol) and one for winter (snowflake symbol) tires.
One division equals 1mm, the marks are at 1.6mm (minimum profile depth of summer tires) and 4mm (for winter tires).
It's recommended to print it with a 0.25mm nozzle and 0.10 or 0.12mm layer height. No support needed, if the frame is printed in an upright position.
If it's not moving freely, a drop of oil or grease on the sides of the slider helps a lot.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
thomers
