Gridfinity Bambu Lab Hotend Storage (4 variants)

Since i was not satisfied with the existing models provided by others, i desigend my own - then i figured out, that i was not satisfied by my own model and created another one. And because why not, i designed another two models, just in case :)

so there are 4 variants with different configurations

• hotends are easy to grab, since the are only lowered half way on
• stores complete Hotend Assemblies (friction fit on silicone sock)
• stores bare hotends (secure gravity fit)
• stores additional part (optionally, on 3 variants)
   

since most other desigs use dedicated holes and slots for all sorts of stuff and you either have empty slots or too much stuff to toss in - especially the screws? who stores the screws, you use the 2 screws that are alreay in the hotend ;) - i've designed version with just bins

Printing

i've provided print profiles as a download

if you want to print them yourself: no supports, just use your favorite settings for your gridfinity bins

Changelog

• 2024-04-26 v13: added 1 mm more clearance on the top, so stackability is improved - there are appearantly differnt hotend fans in circulation, that significantly change the thickness of the assembly - thx to u/DraconPern over on Reddit to point that out
• 2024-05-15 v14: added 0,2 mm more clearance all around the bins to accomodate for variances in the fan geometry - thx to @chrismaddahl for pointing that out