Air tight box 40x40x20mm

This is a Air tight box .

Contains 3 different part.

1. Bottom part prints with PLA or other plastic

2 top lid part - Print with PLA or similar plastic.

3. Gasket - use TPU , and TPC material to print Rubber-like material.(Please use TPU/TPC material parameters as per manufacturer)

Make sure to use recommended materials.

Use Heat set insert. use hole at top face on bottom part .

Use M3 Heat insets and M3 CSK 10mm Bolt for Assembly.

Please DO NOT FORCE to TIGHT SCREWS.

Apply Gentle Pressure to the tight Lid on top.

Share your make and comments here.

Keep following for more related Models.

Have Fun!.