Skadis 40mm to 45mm width adaptor (e.g. for Netgear GS105)

The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern.

The holes are 3.5mm to be tapped M4 and the tolerances should be a nice tight fit. The STEP files should allow you to customize it for different screw sizes

To install them:

• Tap the holes (or use a heat set insert if you prefer and modified the hole diameter)
• Insert the screws almost completely (I chose button head M4x5) and test fit on your device
• Mount the pegs to the pegboard and then slide on the device

In the files section I also provided my peg template as STEP file.