RC Wheel Spacer 1:18 1:24

This is a 7mm wheel spacer for a RC vehicle. I have a 1/18 scale crawler, but should also work on some 1/24 scale as well. I needed a spacer that was slightly shorter than stock, so I designed this one to be around 5mm. You can customize the height of the spacer by inputting the length you need on the Z-axis of your slicer. 

I printed this in PLA and it has held up well after many hours of use, but other rigid filaments should work as well. Print with the bottom side down in the orientation as shown in the picture. Depending on your printer you may need to use a brim. No supports necessary.