Urithiru Dice Tower - Stormlight Archive

Urithiru. The lost tower city, center of the Silver Kingdoms, now the center of your tabletop gaming adventures! This functions as both a dice tower and a dice tray, as the oath-gate platforms make the perfect spot for dice to land.

The opening at the back is 36mm x 30mm, which is big enough for any standard sets of dice to fit with plenty of room to spare. There are ridges on the inside slope to help convince your dice to roll instead of slide. The built in tray at the bottom is large enough that several dice can be rolled at once and not pile up (in case you have advantage, or a fireball).

The provided file is a 3mf and is preconfigured with the settings I used. Make sure when you load it into PrusaSlicer that the negative cutout is present in the model (otherwise you won't have much of a dice tower).

Let me know if you have any questions or comments, and happy printing!

Print Settings

• Material – PLA, PETG, or other (Mine is multi-color because I used this as an excuse to polish off some nearly empty spools)
• Layer Height – 0.2mm
• Perimeters/Walls – 2 (use 3 or more if you have heavy hitting metal dice)
• Infill – 10% Gyroid, Cubic, or other
• Top/Bottom Fill Pattern – Concentric
• Brim – 5mm (optional if you are worried about warped edges)
• Support Material – None required