Mechanical Pencil (Leads 2 mm)

This mechanical pencil is made up of two parts, both must be printed vertically and the use of brim is recommended.

There are 2 files to print: "internal.stl" which contains the lead and one of the 7 external parts available (in the photos you can see "external octagonal.stl")

for "internal.stl" 3 perimeters per layer is also recommended.

It only works with 2mm leads.
Print tested at 0.20mm.

just slide the internal part into the external part and then, once the lead has been inserted, just push inwards to lock it.