April 25, 2024
Description
A simple but sleek Headphone Stand with a 20mm dowel.
Designed for PLA.
Print with 0.2 or 0.25 layer height and at least 3 better 4 perimeters, infill goes with you gusto but for the top part I would recommend to print it lightweight but sturdy.
For assembly I used 3x 3x25 countersunk woodscrews.
Prepare the dowel to the length you want, for easier assembly scribe a line on both sides on the dowel.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
LeDomme
