• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Paint Roller Soil Aerator 3D Printer File Image 1
Paint Roller Soil Aerator 3D Printer File Image 2
Paint Roller Soil Aerator 3D Printer File Image 3
Paint Roller Soil Aerator 3D Printer File Image 4
Paint Roller Soil Aerator 3D Printer File Thumbnail 1
Paint Roller Soil Aerator 3D Printer File Thumbnail 2
Paint Roller Soil Aerator 3D Printer File Thumbnail 3
Paint Roller Soil Aerator 3D Printer File Thumbnail 4

Paint Roller Soil Aerator

Nintenduh69 avatarNintenduh69

April 26, 2024

printables-icon
DescriptionCommentsTags

Description

Instruction\Advice:

Use\Build with caution and at your own risk. Use quality parts and don't be foolish or careless.

I was initially going to use the roller cage but it broke while removing it. I modeled one that sits between the 8mm(5/16") shank shaft and nail cogs. The roller ties in with two washers on either side and jbeale's 8mm shaft collar(uses 3 x M3 screws) at the end of the shaft. I did need to bend the shank a bit so the nails wouldn't hit it. It's best to do this before securing everything down.

3 nails go in through the bigger holes of each cog before it is set on the roller. Put the collars on the other 24 nails before setting them. You can squirt in a shot of hot glue to set them nice and tight. I thought they would eventually pop out but I've used it for hours and they've stayed put.

I've included Amazon Associate links for reference and/or convenience. If/When I break this one, I may try a roller where it attaches in two places. They all seem to be 9-12in wide with a 8mm shaft. A sturdy handle is strongly recommended. I had lithium grease left over from my printer. It makes it quite a bit smoother but it wasn't too bad without it.

Printed parts:

NailRoller--Roller-NailTie-ShaftNCap3Cog <- Print 1x @ 10% infill

NailRoller--Cog <- Print 8x @ 5% infill

NailRoller--Roller-NailTie-ShaftNCap5Cog <- Print 1x @ 10% infill

NailRoller--Roller-16dCollar <- Print 24x

https://www.thingiverse.com/thing:400921 <- jbeale's 8MM shaft nut (I used 25% infill)

Non-Printed parts:

1 x Paint Roller with extension adaptor:
Wooster Brush R016-9 Magikage Ninety Roller Frame, 9-Inch
https://amzn.to/3UaDLbH

1 x Roller extension:
Azusumi Paint Roller Extension Pole Multi Purpose Telescopic Extension Pole Lightweight Sturdy Extendable Pole for Painting Dusting
https://amzn.to/4dde9E0
or
Mintcraft Rp 5030 Wood Extension Pole, 3-piece, 42"
https://amzn.to/4d9Rbxt

3 X M3 bolts:
100pcs M3 Flat Head Countersunk Screw Kit, M3*6mm Stainless Steel Machine Phillips Cross Pan Countersunk Screws Bolt Fastener (6mm)
https://amzn.to/49QGLA0

48 X 16D(3.5in) Nails:
Simpson Strong Tie S16PTD1 16D Preservative-Treated Wood Decking Nails, 3-1/2-Inch and 9-Gauge, Stainless Steel, 1-Pound, 56-Piece
https://amzn.to/4b7jhre

1 X White Lithium Grease
Permatex 80345 White Lithium Grease, 1.5 oz.
https://amzn.to/4barg6Z

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Cable Corners... keep cables in corners! preview image

Cable Corners... keep cables in corners!

muzz64 profile image

muzz64

30,969

Headset Hanger 2.0 preview image

Headset Hanger 2.0

RMTB profile image

RMTB

16,741

PetsTags preview image

PetsTags

Dominik profile image

Dominik

1,134

Universal Filament Filter and Lubricator preview image

Universal Filament Filter and Lubricator

CreativeTools profile image

CreativeTools

26,109

3D4U by Miele Coffee Clip preview image

3D4U by Miele Coffee Clip

3D4U powered by Miele profile image

3D4U powered by Miele

8,628

Simple Customizable Key tags  preview image

Simple Customizable Key tags

constantinost profile image

constantinost

158

SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite! preview image

SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite!

muzz64 profile image

muzz64

24,665

Mechanical wall clock preview image

Mechanical wall clock

Harald Andersson profile image

Harald Andersson

6,967