Drawer inlay for spice containers (Fuchs)

This drawer inlay was made with Fuchs spice containers in mind. 

• spice containers are supported on two sides to prevent sideways motion
• gap (sideways) between containers: ~ 15 mm
• chamfer 4x4 mm at the bottom for drawers with chamfers or fillets on their sides
• dimensions of organizer with 3 columns:
  • width: 220.5 mm
  • depth: 160 mm
  • height: 10 mm
• dimensions of organizer with 2 columns:
  • width: 147 mm
  • depth: 160 mm
  • height: 10 mm

The organizer on the picture was printed with the following settings:

• Filament: PETG clear
• Infill: 15 % Grid (setting in PrusaSlicer: 0.2 mm Speed)
• Layer height: 0.2 mm (setting in PrusaSlicer: 0.2 mm Speed)
• no supports

One can think of printing without bottom layers to speed up printing and reduce material consumption.