Letterboard Fonts - 1/2, 3/4, Full 1-inch peg spacing

The original model is a terrific font set, but for some existing letterboards, such as what is in my office, the peg spacing is set to english measurements: half-inch, 3/4-inch, 1-inch. 

I used Cura for a quick-and-dirty initial scaling, then Fusion 360 to change the pegs on the 1" version.

I put all the models into zip files to assist with organization, the the individual files are also uploaded. Each zip file is labelled by size; 

I used Cura for a quick-and-dirty initial scaling, then Fusion 360 to change the pegs on the 1" version.

• The half-inch files all start with "H - "
• The 3/4-inch files all start with "Q - "
• The 1-inch files all end with "half-peg."
  
  NOTE: The slight stringing in the cover photo was fixed about 1 minute after the photo.