Lid rack/storage

***IMPORTED FROM THINGVERSE***

A rack for lid storage.

I was gettiing tired of the loose lids in the drawer so I made this rack that fits in the drawer. It also look nice on the countertop (but take much less space hidden in the drawer!)

The kit is modular, print as many body as you like. Use one drop of hot glue in the peg holes then slide in the peg to combine parts.

There are pretty close to each other, so if your lids have big handles, you might want to print some 10mm spacers. If you use the spacers, make sure to also print the extended pegs.

Finish your project with the faceplate. I've included a blank faceplate, juste in case you don't like turtles.

UPDATE: I've added a thicker facepate, even more robust.

Print Settings

• Printer brand:

Creality

• Printer:

Ender 3

• Rafts:

No

• Supports:

No

• Resolution:

0.2

• Notes:

I used Duramic marble PLA PLUS. This PLA contains black pigment that does not melt so I also used a 0.6 nozzle to avoid nozzle getting jammed. Did a very good job to my opinion. Take a look at the pictures.