Mini Tape Gun - Tape Dispenser

***IMPORTED FROM THINGVERSE***

***NOTE, IF THE TEETH DONT WORK OUT AS WELL, CHEAK THIS Mini Tape Gun - Tape Dispenser by brycelowe - Thingiverse***

This is a 3d printable version of a mini tape gun I had laying around. It holds the standard tape dispenser rolls. You know, the little 3/4" rolls that you use to wrap presents with at Christmas time.
It prints in 4 parts with support and the little side piece that holds the roller on it simply pressed into place as the layer ridges seem to hold it in. But if that doesn't hold, a bit of super glue will fix it right up.

Note: The screw threads are left handed because of the tape spool rotation direction.

Update 12/29/2015:
I've made some of the requested changes and uploaded the additional files.

Print Settings

• Printer:

DaVinci 1.0

• Rafts:

Doesn't Matter

• Supports:

Yes

• Resolution:

0.2mm

• Infill:

50%

• Notes:

there are a couple of areas that I decided to leave symmetric about the tape roll and that causes them to need support. Other than that the main part lays flat on the printer bed.