Lock-out for fuses

For locking fuses and to mark them that someone is working on them.
Lock out-tag out. Remember to also use an identifier as well as a proper lock.
Will fit most automatic fuses like Chint, Schneider, Eaton etc.

Supplies:

• 1xM4x20mm screw (mine is too long at 25mm)
• 1xM4 nut
• 1xM4*8*6 female thread knurled nut (M4*6*6 works too)

Nut is a bit hard to get into the top.
 

Prints well in PETG and PLA

Recommended settings:

• 0,2 layer,
• min 30%infill
• Supports on