November 10, 2021
Description
A set of two parts: a ring and token that can be interlocked with a garment in between, allowing them to hang on clothing and look awesome. Two types.
My brother printed a couple of circles to test clearance for another project and I stuck them through my shirt. There was a gap tight enough that it stayed and I thought it was a cool effect.
I designed my own and it eventually morphed into a neat ring that reminded me of the famous Stark Reactor (or a Stargate, whichever you prefer).
After a couple of tweaks, I printed the bulkier model and poured resin in the upper half, leaving a gap underneath big enough to still fit the token that allows hanging on a shirt.
Ring has 9 chevrons.
Notice that the token with the debossed circle is larger and has one non-chamfered edge. I used that for a slightly harder line when pouring resin.
POST MAKES!
Buy me a drink at https://ko-fi.com/stetofire
or donate directly
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2 mm
Infill:
20%
Notes:
Use hairspray for bed adhesion.
Cover the token with wax paper and cloth
This allows you to pour into the open upper half of the ring while the token is held tightly below, leaving a cavity open when the resin cures.
License:
Creative Commons — Attribution
Stetofire
