(Posts Only) Amolen Filament Clip

POSTS ONLY, not a complete filament clip.  This is not a remix.

I created these posts to attach to the Amolen filament spool.  They fit tight when printed on my Bambu X1C.  Feel free to scale the model as necessary given your printer characteristics.

To apply them to a different filament clip, such as a Bambu spool filament clip:

1) Cut (slice) the pins away from the original model.

2) Position these pins in their place.

3) Export both parts as a merged STL file to save it.

I have been able to do all this inside of Bambu Slicer.

You might also use these pins to attach something else to the inside or the outside of the Amolen spool, such as an ID label.

I recommend printing filament clips from PETG at 100% infill to give them strength.