Wandhalter für Bosch eBike Akku Powerpack 500 | wall bracket for Bosch ebike battery "PowerPack 500"

Ladestecker passt exakt in den Halter, sodass der Akku beim einsetzen kontaktiert wird. | Charging plug fits exactly into the bracket so that the battery is contacted when inserted.

In addition I used THIS model to fix the charter to the wall.

– 
There are other models out there. Compared to the most, I turned the orientation of the Battery pack, to make it better accessible so close to the garage wall. The battery pack does definitely LOOK better the other way around, but the handle is far better to grip without scratching the wall this way.

Also I wanted to be able to take the charger with me, if required, so both brackets support easy removal of the charger.

old:

My settings for the print:
(my preferred orientation in the screenshot provided and in the 3mf-file)
- 14% Infill
- PLA
- 0.2mm SPEED
- supports for enforcers only, within the model only.
-→ filament: ~195g

Update: 

My original wall bracket broke along the printing layer. a typical weak point for FDM-prints.
I addressed the brake in the print by changing the printing orientation. Although this probably requires a little more support material.

Also different printing Parameters: 

• PETG
• 30% infill
• 0.2mm Quality
• 251g