modular walking sticks

All parts are sized to fit a centre tube 12mm OD 10mm ID 1mm wall, length is determined by users requirements.  I used a steel tube because I need a long stick but for shorter requirements aluminium may be adequate. 
All parts should be a slip fit (depending on your printers tolerances) the handle is secured to the tube via a cross drilled hole and an M3 nut and screw (size depends on handle selected).
To keep the feel of the handles not all the M3 screws will be exact fit in length so you may need to trim some of them.
Additional materials 
1 tube (steel or aluminium) 12mm OD 10mm ID 1mm wall thickness, cut to your requirements.
M3 caps head screws 20mm 25mm and 30mm depending on parts selected
Filaments: 
I used PETG for the handle and its pins as well as the foot.
Colum’s are not load bearing so PLA is fine for them.
The grip on the bottom of the foot I used TPU
For appearance I used gold and chrome paint pens to colour some areas
But if you have an AMS or MMU etc. feel free to add your own
To adjust the columns to your stick height requirements simply adjust the Z height of the column.
I have included a TPU washer, because of the mixed materials involved heat expansion of the core tube can lead to loose fitting columns.
The Axe head parts are a complete stick but can be interchanged with the other parts.

credits to:

Raven skull by Jeff | Download free STL model | Printables.com

Viking Axe with Handle (No Glue Required) by Exner | Download free STL model | Printables.com

Dragon Bust by DalTron Printing | Download free STL model | Printables.com

Grinch Christmas ornament by Josef Průša | Download free STL model | Printables.com

Werewolf bust by White Werewolf Tavern | Download free STL model | Printables.com

and a thankyou to any others i have missed out or taken inspiration from