Trigger Guard & Anti-Reverse Stop Clip

Trigger Stop

I've designed a small clip to stop the trigger from moving away, instead of inserting filament through the end of the grip. I have found the clip to be more durable after mild usage.

Print the trigger stop with a rigid material. Remove the barrel if it is still attached. Then, clip the trigger stop around the outside of the trigger rail. Make sure the protrusion is pointing inwards and is correctly obstructing the trigger from moving away (refer to the photos for a visual). Slide the whole clip as far towards the end of the gun as needed. Slide the barrel back on.

Mirror the trigger stop and repeat the installation for the other hand if necessary.

Trigger Guard

This is to avoid wear from the trigger rubbing on the Touch controller itself.

Print the trigger guard with a slightly elastic material. Slide it over the protrusion on the trigger where it contacts the controller.

Mirror the trigger guard and repeat the installation for the other hand if necessary.

Print Settings

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Notes:

Trigger stop: Inland Red Tough PLA)

Trigger guard: Polymaker Blue Polyflex TPU95A

Category: Video Games