March 9, 2023
Description
If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here!
The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm.
2 slots for 2mm cable.
2 slots for 3mm cable.
2 slots for 4mm cable.
Print instructions:
Layer: 0.2
Perimeters: 2
Infill: 15%
Material: PLA (or whatever you prefer).
Update: 31 Dec 2021.
Upon request from Hobson318 A longer and wider version but still same slot sizes now available for download.
Update: 14 Nov 2021.
Print came out very nice and super flexible without loosing the ability to hold the cable when printed in SainSmart TPU. (see last 3 pictures)
0.2 layer.
20% infill.
2 perimeters.
Inspired by SpaceDog3D design.
Happy Printing :)
The design can cause kinks, excessive wear and damage to some cables over time, and the use of this design is at your own risk!
License:
Creative Commons — Attribution — Noncommercial
9
DFV Tech
