tree insect hotel

Printing of this hotel is easy. No supports needed. You can adjust the dimensions.

You can use multiple colors, where the inner molding can be, for example, black.

Information about the model:

• Diameter:  186mm
• Depth:    100mm 
• Internal depth: 97mm

Due to higher printing speed, you can easily set the layer height to 0.26 mm. Infill 5 to 15% or more.

The object is quite large, if you print it in a scale of 1:1, then the printing time can be 6-9 hours (depending on the content of the filling).