MPU-6050 Mount for Ender 3 V2 with Sprite Extruder

My Ender 3 v2  Neo is on  klipper and I wanted to give resonnace compensation a try. 

I had an MPU-6050 laying around from an ESP32 kit so I modeled a mount for it in Fusion360.

It takes around 11min to print. 

I recommend to print it in the top left corner of the bed to mount the board with the print still attached to it for Y axis measurements. (i didn't do that and had to tape it down)

For X I used one of the threaded holes present in the sprite extruder.

I used short M3 Screws that I had from my PC builds. They self thread in the model.