May 4, 2024
Description
This was requested by one of my followers hoemalone, I hope you like it!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA EryOne Matte BLACK FOREST GREEN Transmission Distance: 1.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA EryOne PLA+ WHITE Transmission Distance: 5
PLA KINGROON Skin Transmission Distance: 5.3
PLA EryOne Rose Red Transmission Distance: 4.5
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to BLACK FOREST GREEN
At layer #14 (1.2mm) swap to Red
At layer #16 (1.36mm) swap to WHITE
At layer #21 (1.76mm) swap to Skin
At layer #26 (2.16mm) swap to Rose Red for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
C3D
