May 5, 2024
Description
I needed a new knob because I replaced the switches in my house to white ones. There was nothing wrong with the dimmer, but it had an ivory knob. I couldn't find a replacement knob in white. My only choices were to buy a new switch with a white knob or make a replacement one.
Printer:
FLSun i3 2017
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.1 or .2
Infill:
40%
Notes:
I used .1 resolution because I wanted it to be very smooth. It's a small part, so it didn't take too long. I also slowed the print speed down to 20mm to reduce inaccuracies.
License:
Creative Commons — Attribution
Steve Van Dokkumburg
