Aquarium Planter with Two Part Lid

Update: I've corrected the STL for this so now it should print fine without scaling (apologies and thanks to yorukishi who alerted me to the severity of the problem there!)

Plant pots for aquarium plants with a protective "lid" in two halves.

We needed something that would protect the medium around the plants during tank cleaning.

The lid of the planter is in two halves so you can put the plant in and then cover up the top, without having to try to feed leaves through a hole and damage the plant in the process.

The lid halves are just a light friction fit - there's no glueing required (unless you want to).

The "drum" of the planter is 6cm in diameter and 7cm tall (the walls and "floor" are 2mm thick, so take that into account). The lid adds another 5mm to the height.

Print Settings

Printer Brand:

Anet

Printer: 

A8

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

10%

Filament: 3D Fillies PLA Black

Category: Pets