Der kleine Maulwurf mit Schaufel (Krtek) - Kids CoatHanger (Little Mole)

My children love the small mole (Krtek ) and when my wife said we needed some coat hangers for our kids coats - i knew what to design :-)

Made 2 versions - one with the bunny and one with the mole.

I printed it with PLA and it holds the coats well up to this day (3 years now) when printed with the right settings.

_____________

These are my settings:

3-4 perimeters

9 top layers / 8 bottom layers

70% “Line” Infill

0,10mm Layer height

No supports needed!

_____________

Colours needed (and colour swaps in the chronological order):

0 - 5,00 mm         BLACK

5,10 - 5,50 mm    WHITE

5,60 - 5,70 mm   SKIN COLOR (or continue with white)

5,80 - 6,00 mm   BROWN  (Dirt Brown or Chestnut Brown)

6,10 - 6,50 mm   BRIGHT GREY (or Silver)

6,60 - 6,90 mm   RED

7,00 - top          BLACK (or whatever the coat hangers color you like)

____________________________

See pictures to get the idea which colors are meant .. :D

If you don't have a skin coloured PLA, you can also leave out this step and continue with white where skin color would be used. (That's the way I printed mine, as I did not have skin color at the time).

---

The Cover piece for the Screws is also meant to be printed in Color “BRIGHT GREY"

-------------------------------------------------

A lot of color swapping work - but in the end it is worth it :-)

Hope you enjoy it and like it as much as my kids do!

You can use 4mm Countersunk Screws to mount it to the wall, holes 18mm apart vertically.

Disclaimer:

I only made the 3D design.  Krtek / Little Mole and all other charakter designs are property of their legal owners. Thats why this print design is offered non commercially only and may not be used for commercial use.

Cheers
Georg