Lego Star Wars 75382 UCS TIE Interceptor (2024)

Wall mount pieces for Lego set 75382 UCS TIE Interceptor (2024)

2-piece set to mount Lego set to the wall. 
Wall mount is angled in a way to show the Interceptor in slightly tilted down position, mainly as its mounted above head in its current location. (Around 15 degrees)

2 pieces separated to allow for easier printing, and to allow for designing and printing alternate mount pieces to allow for different angles/positions

• Print WallMount upright with the open slot to the top.
  (Supports may be required for screw holes depending on printer settings.)
• Mount piece can be printed horizontally or vertically, horizontally should give stronger finish but will require post-printing cleaning of supports.
   

Secure WallMount part to the wall via suitable fixing. Open slots should face upwards.
Slot Mount piece down into WallMount piece with upright leg facing upwards.
Lego Set can be placed down, with the upright leg slotting cleanly into the opening under the cockpit for the original display stand.

I printed parts in PETG at 0.2mm with a 0.6 nozzle and have had no issues at all.
4 or 5 perimeters/shells recommended. 

CAD files included to allow for modification of pieces if alternate angle/positions are required.