Kyojuro Rengoku - Demon Slayer (Filament Painting)

Perhaps my favorite hueforge ive made so far.
Kyojuro Rengoku from Demon Slayer.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Jayo Meta Gray Transmission Distance: 3.5
PLA Geetech Matte Light Gray Transmission Distance: 2.5
PLA Jayo Matte White Transmission Distance: 4.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA Kingroon Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Meta Gray
At layer #17 (1.44mm) swap to Light Gray
At layer #21 (1.76mm) swap to White
At layer #26 (2.16mm) swap to Black
At layer #28 (2.32mm) swap to Red
At layer #33 (2.72mm) swap to Yellow for the rest.