Artist's Brush Cleaning Jar

Artist's paint brush cleaning jar.  The lid fits any wide mouth Mason Jar. Just slide the brush into the clip and suspend it in your favorite cleaning solution.

Print Settings

• Lid:  3 perimeters, 15% Rectilinear Infill, PETG or PLA.
• Clips: 6 perimeters, 15% Rectilinear Infill, PETG
  Note: 6 perimeters and PETG required for durability.  

Parts Required

• 3 stainless steel pins, 3mm X 45mm
  • Material: 3mm x 150mm Stainless Steel Solid Round Rod available from Amazon.
  • Cut three 45mm pieces.  Remove all burrs and round one end.
• Wide Mouth Mason Jar,  pint size worked well.

Assembly

Insert the pins into the lid; the holes are 12mm deep. You may need to size the hole with a 3mm drill bit depending on printer accuracy.