Trivase! A Triplet of Vases (Sorta) in One Vasemode Print

These vases are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize.

Just a little vase design I've been playing around with for a few days.  Finally decided it was fit to print and I'm pretty happy with how it turned out.

You should be able to scale the model up between the various sizes I've uploaded, but you may lose the central weld at some point.  If you have a specific size you would really like to print, just let me know and I can configure a new file.

Print Settings

Resolution:

0.2mm

Nozzle Diameter:

0.4mm

Line Width:

0.8mm (over extrusion for a thicker wall)

Bottom Layers:

4

Inner/Outer Wall Print Speed:

<35mm/s

Spiralize Outer Contour:

Yup